3W 5W Glass Cup Bottle Wine Glass Marking UV Laser Machine for Super Fine Engraving of High-End Market Products

• Customization: Available
• After-sales Service: 2 Years (Help Service Is for Whole Life)
• Warranty: 2 Years (Help Service Is for Whole Life)
• Model NO.: USV-3w/5w/10w
• Applicable Material: Metal and Non-Metal
• Cooling System: Air Cooling
• Technical Class: Pulse Laser
• Laser Wavelength: Deep Ultraviolet
• Laser Classification: Solid Laser
• Type: UV Laser Marking Machine
• Marking Method: Scanning Marking
• Model: Usv-3W/5W/10W
• Laser Power: 3W/5W/10W UV Laser
• Power Brand: Jpt (Optional: Aoc/Coherent From USA)
• Marking Area: 100X100mm
• M2: <1.5
• Software: Original Ezcad
• Laser Wave Length: 355nm
• Cooling Method: Water Cooling/Air Cooling
• Laser Life: 100, 000 Hours
• Control Card: Original Bjjcz Control Card
• Lens: Wavelength
• Galvometer: Sino-Galvo
• Voltage: 110V/220V, 50Hz/60Hz. 1 Phase
• Plug: American/British/European/National Standard
• PC Requirements: Windows 7/8/10 32bit/64bit
• Transport Package: Strong Plywood Case
• Specification: 780*770*1510mm
• Trademark: USCAM
• Origin: China
• HS Code: 8456110090
• Production Capacity: 3000/Year
• Package Size: 77.00cm * 78.00cm * 151.00cm
• Package Gross Weight: 120.000kg

Product Description

Description of USCAM 3w 5w 10w UV laser marking machine

1.Important research shows that JPT laser is more suitable for marking glass compared to USA AOC laser source
2.Glass material is hard, more suitable for marking with high power, at least 5w
3. For glass marking, 10 times beam expansion is better than 6 times beam expansion

Introduction (What's the UV laser ?)
USCAM UV purple light marking machine belongs to the laser marking machine series, but the development is 355mm UV laser.
Compared to infrared lasers, UV lasers directly break chemical bonds in materials. This process generates far less heat and
separates matter down to the atomic level without damaging the environment. Ultraviolet lasers have the advantages of short
wavelength, easy focusing, small spot size, strong energy and high resolution. Because of its high machining accuracy, narrow line
width, high quality accuracy, small heat-affected area and good long-term stability, it can process various irregular patterns and
heterogeneous patterns. Mainly used for fine micro-machining marking and engraving, it has been successfully applied to metals,
semiconductors, ceramics, glass and various polymer materials. Especially suitable for complex graphics and other applications such
as standard compliance, microporous, glass materials and silicon wafers for food and pharmaceutical packaging materials.


Advantage of USCAM UV laser marking machine for engraving glass:
1.The heat affected area is extremely small, no heat effect will occur, no material burning problem will occur, "a coldlight source".
2.The beam quality is good, the focusing spot is smaller, and ultra-fine marking can be realized; the scope of application is wider;
3.Ultra-fine marking and special material marking are the first choice for customers who have higher requirements for marking effect.
4.Marking speed is fast and efficient;
5.Stable performance, small size, low power consumption, high electro-optical conversion efficiency and long service life;
6.The whole machine has the advantages of stable performance, small size and low power consumption.
7.Suitable for processing materials with a large response to thermal radiation
8. On the marking workpiece, the target marking graphics can be better presented to avoid deformation such as elongation and inclination.
Make the engraved pattern closer to its original form.
9. The machine can be equipped with automatic lifting, rotating and other functions.
 

Parameter List of USCAM UV laser marking machine
Laser Type	3W UV integrated laser		5W UV integrated laser	10W UV integrated laser
Model Number	Seal-355-3		Seal-355-5	Seal-355-10
Wavelength	355nm
Mean Power	>3W@30kHz		>5W@40kHz	>10W@50kHz
Pulse Duration	<18ns@30kHz		<18ns@40kHz	<18ns@50kHz
Marking area	200*200mm (Optional)
Marking speed	600~1000 Character/second
Marking line width	0.01mm
Marking line speed	0.01mm
Repeatability	±0.001mm
Power Demand	Ac220V 10 50HZ/60HZ
Frequency Range^[1]	20kHz-150kHz
Spatial Mode	TEM00
(M^2)Beam Quality(M^2)	M^2≤1.2
Beam Circularity	>90%
Beam Full Divergence Angle	≤2mrad^[2]
(1/e^2)Beam Diameter	0.7±0.1mm^[3]
Beam Expander Inside	6X[4]
Polarization Ratio	>100:1
Polarization Orientation	/Horizontal
Average Power Stability	RMS≤3%@24hr
Pulse-to-Pulse Stability	RMS≤3%@30kHz	RMS≤3%@40kHz		RMS≤3%@50kHz
Operating Temp.&RH	0ºC~40ºC;<80%
Storage Temp.&RH	-15ºC~50ºC;<90%
Cooling Mode	/Water-cooling
Cooling Capacity Requirement	500W
Electricity Requirement	DC12V
Average Power Consumption	<200W
Three-Dimensional Size	302mm*180mm*114mm(L* W* H)^[5]
weight	≈9.26kg

Machine parts	Specification	Quantity
Laser generator	American nLignt Laser Module - GL	1 set
Laser wavelength	355nm	1 set
Galvanometer	Scanpuick high digital scanning galvanometer	1 set
Focusing lens	SINO-GALVO lens	1 set
Controlling software	ezcad Software	1 set
Card	BJJCZ CONTROL CARD	1 set
Cooling system	Water cooling	1 set
Fixture	USCAM	1 set

Machine parts

 

Application of USCAM UV laser marker

The UV laser marking machine is mainly based on its unique low-power laser beam, which is suitable for processing materials with large thermal response. It is mainly used in the high-end market of ultra-fine processing, marking and engraving, and is especially suitable for high-speed division of food, pharmaceutical packaging, glass materials and complex pattern cutting of silicon wafers. Such as cosmetics, medicines, food and other polymer materials, the surface marking effect is fine, and the marking is clear and firm. Better than ink coding, no pollution; flexible PCB board marking and scribing; silicon wafer micro-hole and blind-hole processing; LCD liquid crystal glass two-dimensional code marking, glassware surface drilling, metal surface coating marking, plastic buttons, Electronic components, gifts, communication equipment, building materials, etc.

Customers' feedback

# Customers are using machines very well and almost no problem.
# Always get returned orders from agents and customers.
# 10 points of praise for service from our customers

QC And Service

QC
Having been export to USA, Europe, Africa, Central America, Latin America, Mexico, UAE, Yemen, Pakistan, India, Korea, etc.
We have CE, FDA certification for easy exporting and importing.

Service
# 18 months-quality guarantythe machine with main parts(excluding the consumables) shall be changed free of charge if there is
any problemduring the warranty period without human damage.
# We will provide the consumable parts at an agency price when you need replacement.
# 24 hours on line service each day, by wechat, QQ, e-mail, cellphone or remotely controlled online.
# Lifetime patience and professional question and answer service(free technical support), even if it exceeds the warranty period.
# English manual and video for machine using and maintaining will send to you with the machine.
# Free training course at our plant.
# Our staff can be sent to your company to install or adjust if necessary.

Customers in our company

If you come to our factory, you must be impressed by our sincere, enthusiasm, profession, machine quality and best 10 out of 10 service

Company Profile

USCAM specialized in in fiber laser cutting machine, laser marking machine, laser cleaning machine, laser welding machine, co2 laser, CNC router (ATC, Stone machine, molding machine, vibrating knife etc), plasma (gantry plasma, 5 axis, 8 axis and robort plasma etc) and other fields are the leading companies in China's laser industry since 2003.
All machines have passed CE FDA certification, and the main configuration adopts top components imported from Italy, Japan, Germany, the United States, etc., such as Synrid, Coherent, HSD spindle, THK bearing system, Siemens control system, YASKAWA servo.
Relying on strong high-tech strength, it has been highly recognized by relevant international quality systems and government departments in product software research and development, quality inspection files, etc. High-quality products and excellent after-sales service have enabled the company to reach an excellent level, and have been widely supported by customers and agents.

FAQ

Q1: What's the software and what's the 3d dynamic laser marking machines function?
A1: 1).The software is professional Feeltek specially for 3d marking.
2).Mainly have 3 functions: Could mark in large area; could mark in curved surface; could engrave in depth(Relife engraving)

Q2: What system and lens are USCAM laser marking machine using?
A2: The system and 3d lens is professional Feeltek specially for 3d marking.

Q3: what's the Payment term ?
A3:30% T/T in advance and 70% before delivery.

Q4: What's the process of the order ?
1).Proforma Invoice
If you like the machine we offered, then we will make you an Proforma Invoice. Then you could pay 30% T/T in advance, thus we arrange the production for you immediately.

2).Production:
After the 30% T/T as deposit, we will produce the machine immediately, then after after it finished, we will take video test and pictures for you. If you agree, you could pay the balance.

3).Shipping matter:.
You could ship with your own shipper if it's convenient. and we could help to ship for you.

 

Get more information of USCAM laser machine, please feel free contact Grace. My pleasure to help you. :):)

Wood CNC Router, please feel free contact Grace. My pleasure to help you. :):)